Concrete Compression Test Machine Digital Servo Valve 300 KN~2000 KN Meet GB, ISO, ASTM Standards For Cement
Compressive Test Machine Introduction:
Concrete Compressive and Flexural Strength Tester is mainly used for brick, stone, cement, and other building materials, compressive strength test.
Compressive Test Machine Hydraulic System:
The hydraulic oil tank driven by high-pressure pump into the motor oil, flows through the unidirectional valve, high pressure filter, pressure valve, servo valve, into the cylinder.Computer control signals to the servo valve.
Compressive Test Machine Main performance technical specifications:
| Max load KN |
300-2000kN Compressive Test Machine |
| Hydraulic pump rated pressure |
25MPa |
| Loading rate |
0.3KN/S~10KN/S |
| Error loading speed |
±5% |
| Pump rated flow |
1.52L/min |
| Upper and lower bearing plate size |
φ155mm |
| Maximum distance between the upper and lower plate |
260mm |
| Piston diameter |
φ130mm |
Full-automatic Resist Bending Compression Testing ...
Compressive Test Machine Control system:
The Brick Compression Test Machine Test system including digital servo valve, high-precision sensors, controllers and software, high control precision and reliability.Meet GB, ISO, ASTM and other standards for cement, mortar, concrete and other materials testing requirements.
Compressive Test Machine Safety protection device:
When the test force more than 3% of the maximum test force, the overload protection, oil pump motor shut down.
|
