Model | 2012A-49 | 2012A-80 | 2012A-150 | |
Size (W×H×D)mm |
Inner box | 35×35×40 | 50×40×40 | 60×50×50 |
Outer box | 150×195×145 | 180×200×145 | 190×200×155 | |
High-temperature range | 80°C~200°C | |||
Low-temperature range | -55°C~-10°C | -65°C~-10°C | -75°C~-10°C | |
Testing room temperature | High | 60°C~150°C | ||
Low | -10°C~-40°C | -10°C~-55°C | 10°C~-60°C | |
Heating-up time | 60°C~200°C about 25min | |||
Cooling time | 20°C~-55°C about 60min | 20°C~-65°C about 75min | 20°C~-75°C about 90min | |
Impact recover time | High-temperature (150°C) about 30min Low-temperature (-40°C or -55°C or -60°C) about 30min Impact recover time 5min |
|||
Inner material | SUS#304 stainless steel | |||
Outer material | US#304 stainless steel | |||
Insulation | High-precision glass wool + PU foam rubber | |||
Cooling system | Copy blowing type or water-cooled, and environmental protection refrigerant. | |||
Controller | Man-machine interface with touch-programmable control | |||
Protector | Compressor slide off, overheating, over-temperature, over-pressure, dry heat, motor overload protection switch |
|||
Attachment | Compartment frame 2, the test hole 1 | |||
Power | 16KW | 32KW | 48KW | |
Power supply | AC380V±10%, 3PH 50/60Hz |
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website.