2-slot hot and cold shock test chamber is divided into high temperature area, low temperature area and test area three parts, each area is a unique insulation structure, so doing hot and cold impact test. The machine can be automatically or manually cycle the impact or selectively set the two areas or three areas to impact of hot and cold.
WhatsApp/WeChat:+86 137 1188 8650
E-mail: sales1@hengzhunx.com
Equipment summary:
Electrical Electronics 2-Slot Thermal Cycling Shock Test Chamber used binary cooling system that is very effectiveness for cooling, the cooling system is divided into the air-cooled and water-cooled. It also can be connected with a computer, but the record instrument is only for optional purchase. Color LCD touch-control operation interface with Chinese and English, easy to operate.
Applicable industries:
Applied to aviation, military, ships, electrical, electronics, instruments and meters; medical equipment; civilian nuclear energy; colleges and universities; research laboratories; commodity inspection, arbitration, and technical supervision departments; building materials ceramic; petroleum and chemical products, For high and low temperature impact test.
Main features:
1. Large color LCD touch interactive microcomputer control system, easy to understand, running at a glance;
2. Closed imported compressor + environmental refrigerant, cold plate heat exchanger and dual-type ultra-low temperature refrigeration systems;
3. A LAN network communication interfaces to computer remote control, easy to use;
4. Independently set the heat, cold and hot and cold conditions, the impact of three different function, the impact of the implementation of hot and cold conditions, with high and low temperature testing machine functions;
5. Operation at boot time automatically make an appointment ahead of pre-cooling, preheating, standby;
6. Defrost cycles can be set and the number of automatic (manual) defrost;
7. Controller friendly interface and easy procedure setting, abnormal and troubleshooting display complete.
Techincal parameter:
Model | 2012-49A | 2012-80A | 2012-150A | |
Size (CM) | Inner box | 35×35×40 | 50×40×40 | 60×50×50 |
Outer box | 150×195×145 | 180×200×145 | 190×200×155 | |
High-temperature range | 80°C~200°C | |||
Low-temperature range | -55°C / -65°C / -75°C ~ -10°C | |||
Testing room temperature | high | 60°C~150°C | ||
low | -10°C~-40°C / -55°C / -60°C | |||
Heating-up time | 60°C~200°C about 25min | |||
Cooling time | 20°C~-55°C in 60min ; 20°C~-65°C in 75min ; 20°C~-75°C in 90min | |||
Impact recover time | High-temperature (150°C) about 30min | |||
Low-temperature ( -40°C or -55°C or -60°C ) about 30min | ||||
Impact recover time 5min | ||||
Inner material | SUS#304 stainless steel | |||
Outer material | US#304 stainless steel | |||
insulation | High-precision glass wool + PU foam rubber | |||
Cooling system | Copy blowing type or water-cooled, and environmental protection refrigerant. | |||
Controller | Man-machine interface with touch-programmable control | |||
Protector | Compressor slide off, overheating, over-temperature, over-pressure, dry heat, motor overload protection switch | |||
Attachment | Compartment frame 2, the test hole 1 | |||
Power (KW) | 18 | 32 | 45 | |
Power supply | AC380V±10%, 3PH 50/60Hz |
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website.