Low Temperature Chamber HZ-2020B

Low Temperature Chamber is mainly testing the material performance in low-temperature, such as electrical, electronic products, as well as their original devices, The testing equipment is mainly made according to the national standard and user-defined requirements.
Contact number: +86 136 6988 3531

Contact Us Download VR
QR Code 1 QR Code 2

Equipment summary:
Low Temperature Chamber is mainly testing the material performance in low-temperature, such as electrical, electronic products, as well as their original devices. The testing equipment is mainly made according to the national standard and user-defined requirements, it simulate the environment to test proformance of material as well as other relevant characteristics of physical at low temperature. Through testing to determine product performance whether it is still be able to meet the intended requirements.

Corresponding standard:
1. GB 10589-89 low temperature testing condition
2. GB/T5170.2-1996 basic parameters of environmental testing method for Electrical and electronic products,
3. GB2423.1-89 The basic test regulation for electrical and electronic products,  Test A: low-temperature test method

Detailed Data:
 Model  HZ-2020B-80L  HZ-2020B-100L  HZ-2020B-150L
 Inner size D×W×H  400*500*400 mm  400*500*500 mm  500*600*500 mm
 Outer size D×W×H  According actual size
 Index  Temperature  RT  -30°C
 Fluctuate/uniformly  ≤±0.5°C/.+2°C-3°C
 Cooling time  25°C-30°C about 80min
 Control
 system 
 Controller  LED digital P.I.D + S.S.R. microcomputer controller
 Accuracy  Setting accuracy: temperature ±0.1°C, directed accuracy: temperature ±0.1°C, resolution: ±0.1°C 
 Cooling system  Totally enclosed air-cooled single-stage compression refrigerate mode / original from Frence
 "Tecumseh" / totally enclosed air-cooled re-compression refrigerate mode
 Compressor start delay  5min
 Circulatory system  Temperature, low-noise, air-conditioning-type motor. Multi-vane centrifugal wind wheel
 Material  Outer material  SUS304 stainless steel hairline treatment
 Inside material  SUS304 High-quality stainless steel light board
 Insulation  Rigid polyurethane foam, ultra-fine glass fiber cotton
 Standard collocation  a set of Multi-heated glass window attached lighting, testing product shelf 2 pcs,
 test leads holes (25, 50 mm) 1 pcs
 Protector  Leak current, short circuit, over temperature, motor overheating, over-pressure compressor,
 overload, over-current protection
 Timer  0.1999.9 (S, M, H) adjustable
 Power  2.5KW
 Voltage  AC380V±10%, 50±0.5Hz, Three-phase five-wire system
 Working environment  5°C~+30°C ≤85%R.H


Annotation:
1. Above data were measured at temperature (QT) 25℃ and no-load condition.
2. Can be customized non-standard-type high-low-temperature testing mechine according to use’s requirements.

Recommended Products

Have problems with our Testing Machines?