Xenon Aging Test Chamber Technical parameter:
Model | HZ-2011 Xenon Test Chamber | |
Testing room D×W×H | 500*600*500mm | |
Index | Temperature range | RT+10°C~80°C |
Humidity range | 65~98%R·H | |
Spray time | 1~9999min, adjustable | |
Spray cycle | 1-240min, interval adjustable | |
Spectral wavelength | 290nm~800nm (60w/m2) | |
Light source | Xenon lamp (air-cooled) | |
Xenon lamp power | 1kw, 6kw (longevity: 1600H) | |
Temperature and humidity control |
Time controller | Import controller from Moeller |
Accurate range | Temperature: ±0.1°C / humidity: ±0.1°CR·H | |
Sensor | Platinum resistance Pt100Ω/mv | |
Heating system | Independent system, nickel chromium alloy electric heating type heater | |
Humidity system | Stainless steel, external Isolated humidifier | |
Blackboard temperature | Bimetal thermometer blackboard 55°C~75°C | |
Water supply | Humidification water supply with automatic control, xenon lamp cooled by water recycling | |
Temperature controller | Import controller | |
Humidity | Irradiation: 30%~65%RH darkly: up to 90%RH | |
Cycle system | Low-noise air-conditioning-type motors, multi-leaf-type centrifugal wind wheel | |
Material | Outside material | Advanced spray color plate /SUS304 stainless steel |
Inside material | SUS304 stainless steel | |
Sample holder material | SUS304 stainless steel | |
Insulation | High and low temperature aging of silicone rubber | |
Standard | A set of radiation-proof glass window, dynamic testing sample shelf 1, xenon lamp tube 2 | |
Protector | Leakage, short circuit, over-temperature, water shortages, motor overheating, over-current protection. | |
Power | AC380V±10% 50±0.5HZ, Three-phase five-wire system | |
Environmental temperature | ±5°C~+30°C ≤85%R·H |
Xenon test Chamber
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website.