1. Computer Servo Type Universal Bend Testing Machine HZ-1003A.
A. High-precision sensor 1ton from U.S.A.  Accurate Forces within ± 0.5%.
B. High-precision 24 bits A / D, sampling frequency 200Hz.
C. Power System: Panasonic AC Servo Motor + Driver + CAVEX + precision ball screw.
D. Control System: it is more precise using Pulse Command control modem,  the range in speed control is 0.01 ~ 250 mm / min.the board of iron can be adjust to fast and slow by the control board. it is automatically saved after testing.
E. Data transmission: RS232 Transfer.     
F. Display: windows XP test software.
G. Easy to control five speed and calibration system.
H. Test software can precision control in position, speed, rate of load force and rate of stress, satisfy the different requirements of test.
I. Test space: Testing width is about 400 mm (standard), moving space of active iron 1000mm (excluding fixtures)
J. Displacement: coder 2500 P / R, increase four-time accuracy. adopt Japanese Lejing coder that has strong anti-jamming capability, displacement resolution 0.001mm.
Small deformation: Metal extensometers, parsing 0.001mm.
K. Safe equipment : the system would shut down if overload or over-trip

2. software description about Universal Bend Testing Machine.
A. Function of standard modular: provide users with the necessary applications to the test, covering GB, ASTM, DIN, JIS, BS ... and other test standard specification.
B. Being test product information: provide users with the data to set about the product, one time to input and re-use permanently . for improving the accuracy, the data can be corrected by the formula automatically.
C. Dual-Report Editor: provide user with the reported format that user choose (testing program add EXCEL reported format, Extend the previous single pattern of statements)
D. Length unit, force unit and showing the data can exchange, force unit T, Kg, N, KN, g, lb, unit of length mm, cm, inch.
E. Auto-optimization of graphic scale, display the best measurement of graphics. It can test the exchange in graphics. It has the load - displacement, load - time, displacement - time, stress - strain load -2 points extending maps, and lots of graph compared.
F. Test results can be output in EXCEL format.
G. The result of test can be automatically preserved or manual preserved, test can automatically calculate  the most strength, up and down yield strength, loop method, best method, non-proportional extended strength, tensile strength, compressive strength, tensile strength at any point, constant load extension, elastic modulus, rate of elongation, peel range of maximum, minimum, average, force, total energy, bending modulus, x% load in break displacement, load X% in break displacement, and so on . the test data can be stored in any disk.
H. Software has a capability that can output the before data.

3. Relative standard of Universal Bend Testing Machine.
GB/T 1040, GB/T 528, GB/T 529, GB/T 8808, GB/T 13022, GB/T 2790, GB/T 3923, GB/T 20310, GB/T 3690, GB/T 4944, GB/T 3686, GB/T 10654, ASTM D882, ASTM D638, ISO 527, ASTM D412, ASTM D3574, ASTM E8, ASTM D412, ISO 37, ASTM E4, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113

4. Technical parameter: