Four-station End Surface Drilling Automatic Balancer is applied to the unbalance measurement and correction of water pump rotors and rotors that require weight removal on end surface, and can integrate with rotor assembly line to achieve automatic production..
Contact number: +86 13711888650
Four-station End Surface Drilling Automatic Balancer Features
1.Automatic loading & unloading of the assembly line
2.10 inch HMI
3.Six-axis linkage, simultaneous processing
4.Quick product changeover
5.Soft-bearing high precision balancing measurement system
Four-station End Surface Drilling Automatic Balancer Technical Parameters
Technical data at a glance | HZ-9712C |
Max Weight of Workpiece (kg) | 1.6 |
Max Diameter of Workpiece (mm) | 30-130 |
Journal Diameter (mm) | φ5-16 |
Balancing Speed (r/min) | ≤2500 |
Balancing Motor Power (kw) | 0.4 KW Servo Motor |
Min Achievable Residual Unbalance Amount (g.mm/kg) | ≤0.3 |
Testing Time (second) | 5-9 |
Reduction Rate of Unbalance | ≥90% |
Working Pressure (MPa) | 0.4-0.6 |
Operating Voltage (V) | AC: 380V external |
Milling Mode | Drilling |
Take Time (second) | 12-15 Drilling once on the left and right side |
Drilling Power (kw) | 0.75 |
Average Machine Consumption(l/min) | 50 |
Balancing Machine Type | Soft Bearing Measuring Bracket |
Machine Total Power (kw) | 9.5 |
Protection | Phase Sequence Protection, Overload Protection, Air Pressure Monitoring |
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website.