Equipment Overview

Electronic torsion testing machine is composed of loading system, transmission system, data collection, processing, control, display system, etc. It is suitable for testing the mechanical properties of various torsional elastic components, components, bolts, etc. The machine adopts a horizontal structure, embedded high-performance single-chip MCU controller, LCD display, full Chinese operation and display interface, the display information is intuitive and easy to read, multi-button operation, and Chinese display interface make your operation easier. Complete the system parameter settings according to the customary prompt interface sequence.

It adopts AC servo motor and precision reducer transmission, which has the characteristics of uniform loading, stability, no impact phenomenon, and accurate data acquisition and control. The whole machine uses the all-digital ZC Test smart data acquisition and processing system and liquid crystal display system to conduct multi-point testing of the torsion angle of the sample.

Overall machine structure and control system description

[Main machine]

adopts a horizontal structure, and the main structure adopts an overall thickened steel plate structure to ensure the rigidity of the whole machine; the clamps adopt high-quality carbon steel 45 quenching (HR55~65) method, which has a long service life; the installation and disassembly of the specimen are convenient and Fast.

[Drive system]

Fully digital ZCTestmart control system drive; adjustable speed, uniform and stable loading.

[Transmission system]

Adopts precision reducer transmission to ensure uniformity, stability and transmission accuracy.

[Measurement display system]

This machine uses a large-screen liquid crystal display system to simultaneously display the torque T, torsion angle θ, and test speed of the sample. The system can set the torsion angle θ to detect the torque of the specimen, and can also set the torque to detect the torsion angle of the specimen.

[Safety protection system]

Overload protection, over-current protection, etc.

Working environment requirements

1 At room temperature within the range of 100C to 350C, the relative humidity is ≤80%;

2 On a stable foundation or workbench;

3 In an environment with no vibration and no corrosive media around;

4 The fluctuation range of the power supply voltage should not exceed ±10% of the rated voltage.

Technical Parameters