Tensile Testing of Polymer Materials
This equipment is used for tensile testing of polymer materials with a force value between 1-2000N
Mainly implement GB/528-2003 Tensile testing standards for polymer rubber industry materials
Obtain the maximum force, tensile strength, yield strength of the product
Corresponding standard:
GB/T 1040, GB/T 528, GB/T 529, GB/T 8808, GB/T 13022, GB/T 2790, GB/T 3923, GB/T 20310, GB/T 3690, GB/T 4944, GB/T 3686, GB/T 10654, HG/T 2580, DL/T 1476, JC/T 777, HG/T 2538, BS EN ISO 1421, DIN 53357, BS 903, BS 5131, ASTM D3574, ASTM D6644
| Model | HZ-1004B |
| Max load | 100N, 200N, 500N, 1KN, 2KN option |
| Accurate grade | 1grade /0.5 grade |
| Effective measuring range | 0.2%~100%(1grade)/0.4%~100%(0.5 grade) |
| Measuring accuracy | the value ±1% / the value±0.5% |
| Tester resolution | Max load 1/200000, constant the resolution |
| Load sensor | Basic configuration: sensor(max load): one |
| Extended configuration: can add more sensors | |
| Effective testing width | 300mm (can be customized) |
| Effective tensile stroke | 800mm;1000mm;1200mm (can be customized) |
| Range of testing speed | 0.001~500mm/min |
| Accuracy of displacement measurement | Tolerance: ±0.5%/ tolerance: ±0.2% |
| Accuracy of measured deformation | Tolerance: ±0.5% (customer to choose larger or small deformation) |
| safety | Electronic-limit protection |
| Testing platform moving device | Fast /slow two speeds to control, can jog |
| Return back | Manual or automatic operation. After the test, the moving iron return to initial position with the highest speed by manual or automatic operation |
| Overload protection | Overload 10%, automatic protection |
| Fixture | According to customer's need |
| Machine size | 65x36x210cm (L*W*H) |
| Power system | Panasonic AC Servo Motor + Driver + high-precision ball screw |
| Power supply | 220V, 50HZ |
| Machine weight | (about) 160 KG |
| Units | KG, N, LB, TON can be exchanged. |
