Equipment Summary：

Auto Parts and corrosive salt spray chamber is for the surface treatment of a variety of materials which containing paint, electroplating, organic and inorganic coating, anode processing, antirust oil, chemical processing quality of corrosion, and then reach the corrosion resistance of the products for a long time.

Features:

The entire imported PVC board system, within the box with the ring with a state-of-the-art three-dimensional reinforcement technology, structural strength, never deformation. The laboratory use five surface heating to  heat, ensure that you have the average temperature of the test chamber. (± 1 ° C).

Test : the physical change from saline along Bernoulli close-up atomization, will make the diffusion speed of doubling, and naturally falls on the specimen, the fog quantity difference can be controlled in± 0.3mml/80cm2H saturated air using air Henry's law, in the heating and humidifying, and provide the necessary laboratory humidity. 

Temperature directly affect the corrosion rate of the prerequisite conditions, temperature controller of the P.I.D. mode, the control error of ± 0.5C.
The test chamber size: W*D*H cm 160*100*50 120*80*50 90*60*50 60*40*45
Material: imported PVC sheet - P.P

Technical parameter